Skip to Main Content

Beambox Laser Cutter

A guide for using the Beambox laser cutter in the MakerSpace

Materials

The MakerSpace does not supply materials for laser cutting, you must bring these yourself. As such it is important to ensure your materials are the proper type and thickness for the laser cutter. The below is a rough guide.

Material

Max Cutting Thickness

Wood

5mm

Acrylic

5mm

Leather

2.5mm

Cardboard       

3mm

Felt

8mm

 

Important: Do not cut plastic with the laser cutter unless you are certain that it does not release carcinogenic particles when melted. Acrylic is always a safe bet.